Galvanized Adjustable 3.5m 4m Carbon Steel Scaffolding Prop in Construction

Product Description

Tianjin Youfa Brand  High Quality adjustable Scaffolding Steel Prop for Formwork

Tianjin YOUFA steel pipe group was the biggest steel pipe manufacturer in China,
we New invest and built a new scaffolding factory in Tangshan city. welcome to visit our factory!

Steel Prop system
   
Steel Prop is a main part in Formwork project, A complete set of steel prop consists of an inner tube, an outer tube, a prop nut,
a Jack plate and a Base plate. it can be adjusted to any length inside its range. Shoring props are known by several names
including: scaffolding prop, formwork prop, industrial prop, building prop, shore prop, acro prop, acro jack, acrow prop and
post shores. They are height adjustable by a wide diameter screw thread, which is on the outside of the tube. The use of a screw thread
means that the props are able to be tightened when already in place,  which allows the user to adjust the load that each one bears.
Accessory: G-Pin / Line Pin / Wire Pin

 

Italian Prop
Adjustable Length	Outer Tube	Inner Tube	Wall Thickness
1600-2900mm	56mm	48mm	1.5-2.75mm
1800-3100mm
2000-3600mm
2200-4000mm
Surface Treatment	Painted,powder coated,electro galvanized or hot dip galvanized
Middle East or German Prop
Adjustable Length	Outer Tube	Inner Tube	Wall Thickness
1400-2700mm	60.3mm	48.3mm	1.6-4.0mm
1600-2700mm
1620-2640mm
2000-3500mm
2200-4000mm
3000-5500mm
Surface Treatment	Painted,powder coated,electro galvanized or hot dip galvanized
Spain Prop
Adjustable Length	Outer Tube	Inner Tube	Wall Thickness
800-1400mm	48mm	40mm	1.5-2.5mm
1600-3000mm
2000-3500mm
2200-4000mm
Surface Treatment	Painted,powder coated,electro galvanized or hot dip galvanized
Push Pull Prop
Adjustable Length	Outer Tube	Inner Tube	Wall Thickness
1400-2700mm	60.3mm	48.3mm	1.6-4.0mm
1600-2700mm
1620-2640mm
2000-3500mm
2200-4000mm
3000-5500mm
Surface Treatment	Painted,powder coated,electro galvanized or hot dip galvanized

Feature

* Convenient erection with its nut and handle

* 20kN& 30kN at different open lengths for your selection

* Anti-dislocation of inner tubes flying out of outer tube

* 100mm safe zone design on the top of inner tube avoiding any injury on the hands of users

* Hot dip galvanization treatment prevent the prop from corrosion, other treatment are also available

* According to EN 1065 standard 

PRODUCTION

We use high quality steel pipe, after cutting, punching, welding, quality inspection, galvanizing or painting,Final Assembly completed.
For shoring purpose, in various kind of slab projects ,it is very popular in the Middle East and Europe.

TESTING

Every product we have to go through strict testing and testing to ensure that each product is qualified.
Including raw material,size,power ect.

Important Instructions:
• Once erection is finished, double-check the props before use.
• Respect the prop spacing in accordance with the project.
• Prop load capacities and engineer's design must be observed.
• The load acting on the prop is vertical and centred. No horizontal loads act on the prop.
• Check formwork and prop erection before concrete pouring.
• Pouring has to be done from heights which do not cause strong shaking of the formwork or the props.
• Avoid the sudden emptying of the concrete bucket onto the formwork.
• Formwork stripping and prop removal is only carried out when the concrete strength is sufficiently high.
• Before starting any dismantling operation, check the state of the props.
• After removal, props should not be irregularly piled up.


Packing:
1. Generally, the total net weight of loaded container is 22 tons to 26 tons, which need be confirmed before loading.
2. Different packages are used for different products: 
---bundles: timber beam, steel props, tie rod, etc.
---pallet: small parts will be put in bags and then on pallets.
---wooden cases: it is available on customer's request.
---bulk: some irregular goods will be loaded in bulk in container.




Delivery:
1. Production: For full container, normally we need 20-30 days after receive customer's down payment.
2. Transportation: It depends on the destination charge port.
3. Negotiation is needed for special requirements. 



What can you provide as a manufacturer?
1. We offer one-stop solution and our services include Production, Packing,Loding, Shippment Ordering, 
Custom claiming, Custom clearing etc.
2.Product range: Ringlock System Scaffolding, Cuplock System Scaffolding, Kwikstage System Scaffolding, 
Tubes & Fittings, Steel Planks, Base jacks etc.
3. OEM and ODM service offered upon customer request.
How can I trust your quality?
1. YOUFA GROUP has been accessed by Sira Certification Service and found to comply with ISO9001:2008 
for the manufacture and sales of scaffolds. Quality inspectors examine the whole production flow from raw 
material selection to final products.
2. Safety is the prime concern in YOUFA. All components are backed up by an intensive test program, 
fabricated either by autowelding machines or man welders(welders have got Welder's Qualification Test
Certification from SGS).